Coffee table
Print Profile(1)
Description
4.5kg plastic. Designed to be printed with an H1 printer, or similar. (Large build plate.)
Tripod legs are unique (the holes for guide pins differ). IMPORTANT that you assemble the surfaces with three holes first.
The tabletop is printed 6x.
Tripod parts are glued together. (Glue the tripod before screwing in the foot at the end.)
The leg is glued to the tripod.
The tabletop is attached with guide pins and the center screw. (I also glued it.)
No assembly details are included, except for glue. I have created a key to tighten the center screw; be careful not to overtighten it on the way down, especially if you printed in PETG.
Good luck.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)