Build Plate QR Code Alignment Tool for Bambu Lab Third-party Build Plates
Print Profile(1)
Description
I love these build plate QR codes created by elumpse but I struggled to get them placed correctly. Using the provided alignment tool I continued to receive the build plate localization marker error on some of my plates.
This alignment tool was designed for 5mm² QR codes with a 1mm border. It should snap on to your build plate and be pushed up against the bottom. Center the QR code between the arms of the alignment tool with the top edge resting against the center peg (see picture).
I used a stock dual-sided textured plate, with the notch on the right side, to come up with the measurements.
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like and ★ Rate!
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like, ★ Rate, and 🚀 Boost!
Boost Me (for free)
If you find this model useful please consider sending a boost my way as it really encourages me to keep designing.
* Some of the links above may be affiliate links
License
Comment & Rating (133)