LOTR, Lord of the Rings Bookmark

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Safe between the pages of your favorite epic fantasy, the Eye of Sauron keeps watch. 👁️✨The ultimate reading companion for your journey through Middle-earth. This bookmark captures the iconic elements from Lord of the Rings - it starts at the crown of the castle Barad-dûr, where a fiery Eye of Sauron rests, and as it cascades down the spine of the tower and transforms into a sword's blade, the iconic Elvish Black Speech inscription, from the One Ring, sits to complete the design.

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

This print uses 4 unique filaments:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions: Not applicable. This is a style for which colors are already assigned in the STLs. Since this print has at times multiple colors on a layer, an AMS is required.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print.

Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections