Gandalf the Grey | Lord of the Rings Bookmark

Become an officially licensed SkyLab 3D seller here: The SkyLab 3D | Patreon

"A wizard is never late, nor is he early. He arrives precisely when he means to."

Bring one of Middle-earth's most iconic characters to your bookshelf with this Gandalf the Grey bookmark. Featuring the wise wizard standing with his staff in a detailed engraved-style illustration, this design captures the timeless presence of the guide who led the Fellowship on their quest.

Whether you're rereading The Hobbit, The Lord of the Rings, or adding to your fantasy collection, this bookmark is a perfect companion for any Tolkien fan.

If you print one, I'd love to see it! Please consider uploading a make, leaving a rating, and sharing photos of your finished bookmark. Your support helps me continue creating new fantasy-inspired designs.

Enjoy!

----------------------------------------------------------------------------------------------------------

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Dark Gray
    At layer #16 (1.36mm) swap to Ash Gray
    At layer #22 (1.84mm) swap to Ivory White for the rest.