Thor Hueforge
Print Profile(1)
Description
Another one! A fast one also. I have enabled a pause so that you can change colors in AMS . Enjoy and post pics your prints!
Project: Thor 1.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm
The Model is 160.16x200mm in size
You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.36mm and the Actual Thickness is 2.36mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#9b9ea0 PLA BambuLab Basic Gray Transmission Distance: 1.5
#d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.7
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 7 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #18 (0.8mm) swap to BambuLab Basic Blue
At layer #21 (0.92mm) swap to BambuLab Basic Blue Gray
At layer #24 (1.04mm) swap to BambuLab Basic Gray
At layer #28 (1.2mm) swap to BambuLab Basic Light Gray
At layer #34 (1.44mm) swap to BambuLab Basic Red
At layer #47 (1.96mm) swap to BambuLab Basic Yellow
At layer #54 (2.24mm) swap to BambuLab Basic Light Gray for the rest.
Boost Me (for free)
Remember to boost prints you like! Its Free!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)