Counter Strike 2

I made this one a while back and forgot to upload it cheers.

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #080a0d PLA BambuLab Basic Black  Transmission Distance: 0.3
    #68724d PLA BambuLab Matte Dark Green  Transmission Distance: 1
    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #5b6579 PLA Bambulab Basic Blue Gray  Transmission Distance: 1.9
    #6f5034 PLA BambuLab Basic Cocoa Brown  Transmission Distance: 0.2
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.5
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with PLA BambuLab Black
    At layer #9 (0.8mm) swap to BambuLab Matte Dark Green
    At layer #11 (0.96mm) swap to BambuLab Matte Dark Blue
    At layer #15 (1.28mm) swap to Bambulab Basic Blue Gray
    At layer #17 (1.44mm) swap to BambuLab Basic Cocoa Brown
    At layer #18 (1.52mm) swap to BambuLab Basic Sunflower Yellow
    At layer #19 (1.6mm) swap to BambuLab Basic Pumpkin Orange
    At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest.