Park Hyun Bin Hueforge
Print Profile(1)
Description
Boost Me (for free)
A little boost for my work is always appreciated and helps me a lot, and it's Free! :)
https://www.patreon.com/cw/3D_MENTIEL
If you like my work, wish to sell my creations or find exclusive models, come and take a look at my Patreon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.98x199.98mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.2
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#c3aca3 PLA Sunlu beige Transmission Distance: 6.7
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Blue Gray
At layer #20 (1.68mm) swap to beige
At layer #27 (2.24mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)