Spider-Venom

I actually made this one back in April/May but totally forgot to upload it! 

Cheers.

Project: V1 Aggressive.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm

    #080a0d PLA Bambulab Basic Black  Transmission Distance: 0.3
    #5b6579 PLA Bambulab Basic Blue Gray  Transmission Distance: 1.9
    #9d2235 PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6
    #7d6556 PLA BambuLab Dark Brown  Transmission Distance: 0.2
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ae835b PLA #BambuLab Matte Caramel  Transmission Distance: 1.5
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with PLA Bambulab Basic Black
    At layer #13 (1.12mm) swap to Bambulab Basic Blue Gray
    At layer #15 (1.28mm) swap to BambuLab Basic Maroon Red
    At layer #18 (1.52mm) swap to BambuLab Dark Brown
    At layer #19 (1.6mm) swap to BambuLab Basic Red
    At layer #22 (1.84mm) swap to #BambuLab Matte Caramel
    At layer #25 (2.08mm) swap to BambuLab Matte Ivory White for the rest.