FC Augsburg Fuggerstadt Graffiti Hueforge FCA
Print Profile(3)
Bill of Materials
Description
FC Augsburg Forever Fuggerstadt Graffiti Hueforge
I hope you like it! Subscribe to me so you don't miss any new uploads!
Select the desired size in the print profile. I have created profiles for 200x200, 150x150 and 100x100 mm.
You can also scale the model along the X and Y axes as desired. The Z-axis must NOT be changed!
This image contains five colors. For black and white, I select the same slot in the AMS. After the printer is finished with black, the spool with white filament goes into this slot. Thus, more than four colors are not a problem with an AMS. Don't be afraid - try it!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm
Filaments Used:
#000000 Bambu Lab PLA Matte Charcoal Transmission Distance: 0.6
#3f8e43 Bambu Lab PLA Basic Mistletoe Green Transmission Distance: 1
#c00d1e Bambu Lab PLA Basic Red Transmission Distance: 4
#fce300 Bambu Lab PLA Basic Yellow Transmission Distance: 6
#ffffff Bambu Lab PLA Matte Ivory White Transmission Distance: 3.5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Mistletoe Green
At layer #14 (1.2mm) swap to Red
At layer #22 (1.84mm) swap to Yellow
At layer #28 (2.32mm) swap to Ivory White for the rest.
Boost Me (for free)
If you like my creation, please support me with a small boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)