Print Profile(2)
0.2mm layer, 2 walls, 15% infill
2.4 h
1 plate
0.2mm layer, 2 walls, 15% infill
3 h
1 plate
Boost
42
88
19
0
189
102
Released
Description
Stackable paper tray, print as many sections as you need.
Fits Bambu beds.
Can be oriented vertically or horizontally.
No supports required, fits together. Can add a little glue if it's too loose.
Comment & Rating (19)
All
Works pretty well for me
1
Reply
can someone upload it for x1 or p1s ? when I slice it I am getting bed size error :(
0
Reply
Just change your printer on the Prepare tab
0
Reply
Replying to @swagwerd
doesn't have any other option than A1
0
Reply
When I switch to the P1S it says that it is too close to the exclusion area and that there may be collisions when printing. It won't even let me slice it. I have to scale it down 93% before the error goes away. Will this only work on the A1?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great Print!!.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great Print!!.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Pretty good. I successfully made a tall tower with several of these. Some of the pegs broke but it still seems fine structurally.
0
Reply
do you think you could design something that extends the tray to hold a full piece of paper that might could be printed as an attachment to each tray?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld