Wendigo - Cryptids Series

As a Métis dude I always enjoyed the Wendigo story, I may try to upload more cryptids and folktale/mythos based ones in between series and when I feel like it. Always love hearing about the lesser known ones so if you have a good one in mind please don't hestitate.

Project: Wendigo.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.08mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #566078 PLA BambuLab Basic Transmission Distance: 2.5
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 2
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 6 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #9 (0.8mm) swap to BambuLab Matte Dark Blue
    At layer #11 (0.96mm) swap to BambuLab Basic Blue Gray
    At layer #15 (1.28mm) swap to BambuLab Basic Red
    At layer #18 (1.52mm) swap to BambuLab Matte Ash Gray
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White for the rest.