Mothman - Cryptids Series

I've always loved me some Mothman/Cryptid stories/lore, so figured I'd make a cool one, check out my Wendigo which will be uploaded tomorrow morning. Leaning towards making this into a series but who knows.

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #042f56 PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #5b6579 PLA Bambulab Basic Blue Gray  Transmission Distance: 1.9
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 5 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to BambuLab Matte Dark Blue
    At layer #12 (1.04mm) swap to Bambulab Basic Blue Gray
    At layer #14 (1.2mm) swap to BambuLab Basic Red
    At layer #18 (1.52mm) swap to BambuLab Basic Black
    At layer #20 (1.68mm) swap to BambuLab Basic Red
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White for the rest.