Earthbound

Old file I finally got around to uploading, also the green shoe soles in this display pic were fixed they are now white.

Project: Thicker.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.48mm

    #080a0d PLA BambuLab Basic Black  Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 1.9
    #ff0000 PLA BambuLab Basic Red  Transmission Distance: 4
    #61c680 PLA BambuLab Matte Grass Green  Transmission Distance: 2
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #e4bdd0 PLA BambuLab Matte Sakura Pink  Transmission Distance: 2.2
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.8
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with PLA BambuLab Basic Black
    At layer #9 (0.8mm) swap to BambuLab Basic Blue
    At layer #12 (1.04mm) swap to BambuLab Basic Red
    At layer #14 (1.2mm) swap to BambuLab Matte Grass Green
    At layer #16 (1.36mm) swap to BambuLab Basic Red
    At layer #17 (1.44mm) swap to BambuLab Matte Mandarin Orange
    At layer #19 (1.6mm) swap to BambuLab Matte Sakura Pink
    At layer #21 (1.76mm) swap to BambuLab Basic Sunflower Yellow
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White
    At layer #23 (1.92mm) swap to BambuLab Basic Sunflower Yellow
    At layer #25 (2.08mm) swap to BambuLab Matte Mandarin Orange
    At layer #26 (2.16mm) swap to BambuLab Matte Ivory White for the rest.