Bookmark, July Flower, Birth Month - Free 3D Print Model

Search models, users, collections, and posts

Dame Jo

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

H2D Pro

X1E

P1P

P2S

H2D

A2L

X2D

X1 Carbon

H2C

H2S

0.08mm layer, 1 walls, 100% infill

Designer

1.6 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Membership

Looking to sell physical prints of this model? You can easily obtain a commercial license right here by joining my membership tier.

Join

This 3Mf was done on a Cool Plate. If you are using a different plate, make sure you change to the plate you're using.

You do not need an AMS to change colours. At the layer where you should change colour, change to pause and manually change the colour when the print pauses.

Bookmarks need a clean plate to avoid any corners rising.

July Flower - Larkspur. Makes a great Birthday gift!

Project: July.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 48.38x152.46mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.3mm and the Actual Depth is 1.4mm

Filaments Used:
    PLA 3DHOJOR Black Transmission Distance: 0.6
    PLA Polyterra Blue Transmission Distance: 3
    PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue
    At layer #10 (0.88mm) swap to White for the rest.

Boost Me (for free)