Wall Mounted Stemware Holder

A modern wall-mounted holder designed to display and store stemmed glasses while adding a stylish touch to your kitchen, dining area, or home bar.

The model is available in two versions:

• Minimal – a clean and simple design.
• Honeycomb – featuring a decorative geometric pattern.

Designed to fit a wide range of stemmed glasses, including wine glasses, champagne flutes, cocktail glasses, and similar glassware. Since glass dimensions vary between manufacturers, compatibility with every model cannot be guaranteed.

The holder looks especially good when printed with Fuzzy Skin enabled, giving it a premium textured finish that complements the geometric design.

Recommended Fuzzy Skin Settings

• Type: Contour (Outer walls only)
• Thickness: 0.1 mm
• Point Distance: 0.2 mm
• For the Fuzzy Skin texture to appear only on the outer visible surfaces, print the model standing on its bottom edge (just as it will be mounted on the wall).

Print Settings

• Material: PLA, PETG or similar
• Layer Height: 0.2 mm 
• Walls: 2-3
• Infill: 15–25%
• Supports: Required

The model includes overhangs and requires supports for a successful print.

PLA works perfectly for indoor use, while PETG is recommended for improved durability and better heat resistance.

Mounting

The holder is designed to be mounted using screws.

Always use appropriate screws and wall anchors for your wall type, and make sure the holder is securely mounted before placing any glassware.

Features

• Modern minimalist design
• Two versions included (Minimal & Honeycomb)
• Compatible with many common stemmed glasses
• Decorative and functional
• Easy to print

If you print one, I'd love to see your makes!