Storm Shadow Stance - Cobra - GI Joe Hueforge

----------------------------

My designs here on MakerWorld are intended for PERSONAL printing use only. I do not, as of right now, have a commercial membership but if you download, print, like and boost I'll be able to activate a commercial membership here and expand my time and effort spent working on these designs and making more for you to sell including exclusives and requests through a Patreon or otherwise! So the more boosts and likes you can help me with, the more I can give back!

Thanks!

IslandLooter

A striking Storm Shadow tribute featuring the iconic white ninja gear, dual katanas, and bold red Cobra insignia. Clean lines, dynamic pose, and crisp detailing make this a standout piece for G.I. Joe fans and collectors.

----------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #757575 PLA BambuLab Matte Nardo Gray  Transmission Distance: 0.7
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #de1619 PLA PolyTerra Lava Red  Transmission Distance: 1
    #e8dbb7 PLA BambuLab Matte Desert Tan  Transmission Distance: 1
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Nardo Gray
    At layer #9 (0.8mm) swap to Ash Gray
    At layer #11 (0.96mm) swap to Mandarin Orange
    At layer #13 (1.12mm) swap to Lava Red
    At layer #15 (1.28mm) swap to Desert Tan
    At layer #16 (1.36mm) swap to Ivory White for the rest.

You can change the size as you like, just don't change the Z-Height.

All Hueforge prints can be adjusted for size, but please do not adjust the Z height, it will affect the final look of the print! 

If you find an issue with a print or profile, please message me so I can correct before you publish a review, I'm happy to help sort it out with you!

All images I post with the profile are my own prints, no renders. If you use the same filaments as I publish these with you should have the same results.

If you have an idea you'd like to see made into a Hueforge, send me a message on here and I'll see what I can do!