Daredevil Born Again Season 2 'Cracks' Hueforge

----------------------------

My designs here on MakerWorld are intended for PERSONAL printing use only. I do not, as of right now, have a commercial membership but if you download, print, like and boost I'll be able to activate a commercial membership here and expand my time and effort spent working on these designs and making more for you to sell including exclusives and requests through a Patreon or otherwise! So the more boosts and likes you can help me with, the more I can give back!

Thanks!

IslandLooter

Daredevil: Born Again – Season 2 A gritty, battle‑scarred helmet rendered in stark grayscale with violent red fractures cutting through the metal. This piece channels the raw, bruised spirit of Born Again—a symbol of Matt Murdock’s resilience, pain, and refusal to break. Perfect for fans who love their vigilantes weathered, wounded, and still standing.

---------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #ac1a17 PLA PolyTerra Army Red  Transmission Distance: 0.3
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Dark Gray
    At layer #12 (1.04mm) swap to Ash Gray
    At layer #15 (1.28mm) swap to Army Red for the rest.

The image can be resized as you like, just don't change the Z-Height!. 

All Hueforge prints can be adjusted for size, but please do not adjust the Z height, it will affect the final look of the print! 

If you find an issue with a print or profile, please message me so I can correct before you publish a review, I'm happy to help sort it out with you!

All images I post with the profile are my own prints, no renders. If you use the same filaments as I publish these with you should have the same results.

If you have an idea you'd like to see made into a Hueforge, send me a message on here and I'll see what I can do!