My name's Forrest, Forrest Gump. Want a chocolate?

One of my favourite movies growing up (and still to this day really), hope I did it justice.

Project: 1.1

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #4d3324 PLA BambuLab Matte Dark Chocolate  Transmission Distance: 0.1
    #434b2f PLA BambuLab Matte Dark Green  Transmission Distance: 0.2
    #cbc6b8 PLA #BambuLab Matte Bone White  Transmission Distance: 3
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #56b7e6 PLA BambuLab Matte Sky Blue  Transmission Distance: 1.3
    #0056b8 PLA #BambuLab Basic Cobalt Blue  Transmission Distance: 5
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #9 (0.8mm) swap to BambuLab Matte Dark Chocolate
    At layer #11 (0.96mm) swap to BambuLab Matte Dark Green
    At layer #13 (1.12mm) swap to #BambuLab Matte Bone White
    At layer #16 (1.36mm) swap to BambuLab Matte Mandarin Orange
    At layer #17 (1.44mm) swap to BambuLab Matte Sky Blue
    At layer #20 (1.68mm) swap to #BambuLab Basic Cobalt Blue
    At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest.