USMNT Team USA World Cup 2026 HueForge
Print Profile(1)
Description
THE TOTAL SIZE OF THIS MODEL IS 500mm BY 200mm. This is multiple prints (3 plates) put together. They are connected with a puzzle like connector and putting some tape on the back of the HF where the seams connect. You can then use double sided tape to hang on the wall or you can print a HF stand for it.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Black Transmission Distance: 0.3
Blue Transmission Distance: 8.5
Red Transmission Distance: 7
White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #10 (0.88mm) swap to Red
At layer #17 (1.44mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)