Search models, users, collections, and posts
Spice Rack
IP Report
Print Profile(3)
0.2mm layer, 3 walls, 15% gyroid infill
39 min
1 plate
25mm height (0.2mm layer, 3 walls, 15% infill)
1.5 h
1 plate
A1 mini, 4 times, 0.2mm layer, 3 walls, 15% gyroid infill
2.7 h
1 plate
Open in Bambu Studio
Boost
210
768
19
14
280
161
Released
Description
This is the arms for the spice rack I created. I used 3/8" wooden dowel from Lowes. Cut the dowel to length and mount using 3M command strips.
Printed on the Monoprice Maker Select Plus using Cura at 0.2, brim, with 15 infill.
The large version if for spice containers that are wider, although are the same height. I haven't tested them, so use with caution. This version may need stronger adhesion to the cabinet / door.
Comment & Rating (19)