Naruto Hueforge

Naruto Hokage Mode – 7-Color HueForge

Bring Naruto to life with this vibrant 7-color HueForge print, designed to produce bold colors, crisp details, and a stunning layered effect. The model is AMS-friendly, requiring only three sequential filament swaps during the print (or you can perform the swaps once if preferred).

Print Settings

• 100% infill
• Layer height: 0.08 mm
• Base layer: 0.16 mm
• Model size: 200 × 132.41 mm
• Base thickness: 0.56 mm
• Actual thickness: 2.96 mm
• Maximum thickness: 3.20 mm

Filaments Used

• Deeplee PLA Black
• PolyTerra Earth Brown
• Bambu Lab Matte Scarlet Red
• Bambu Basic Orange
• Bambu Basic Yellow
• PolyTerra Pastel Candy
• Bambu Basic Jade White

Layer Swap Instructions

• Start with Black
• Layer 10 (0.88 mm): Earth Brown
• Layer 12 (1.04 mm): Scarlet Red
• Layer 18 (1.52 mm): Orange
• Layer 26 (2.16 mm): Yellow
• Layer 32 (2.64 mm): Pastel Candy
• Layer 35 (2.88 mm): Jade White (finish)

AMS Slot Setup

Start

1. Black → change to Yellow (either once black is finished, or while Orange is goin)
2. Earth Brown → change to Pastel Candy (either once earth Brown is finished, or while Orange is goin)
3. Scarlet Red → change to Jade White (either once Scarlet Red is finished, or while Orange is goin)
4. Orange

You can also decide to add a pause at a layer around the end of orange, so you can swap the first three manually at once and resume printing. 

Frame available as a separate print profile here. Snaps in place, no need for glue. Snug fit, you have to carefully but forcefully snap it in in the right direction (make sure you don't force it if it doesn't coincise) and it will be flush on the back of the frame!

If you like it, I also have the Easel Stand used in these pictures

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

LICENSE TERMS

Thank you for supporting independent creators.

This model is licensed for personal use only. 

Commercial sale of physical prints or digital files is prohibited unless you hold an active commercial license.

Commercial License Available: https://buymeacoffee.com/Krizia88ck

Join as a commercial supporter and legally sell your prints while retaining 100% of your earnings.

If you’ve been enjoying my designs, you can now support my 3D printing journey over at Buy Me a Coffee! 

Whether it’s a one-time treat, joining as a member for exclusive perks or getting your commercial license rights to sell my models, your support means the world to me and keeps the printer running. 

Check it out here: https://buymeacoffee.com/krizia88ck