Starwars Film Titles
Print Profile(1)
Description
I have made changes to the printer settings which will not pull through if you print from the Handy App and the end result may not be the same.
*** This Hueforge needs to be printed with a 0.2mm nozzle ***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
#000000 PLA Geeetech Black Transmission Distance: 0.1
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 1
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#ff7338 PLA Anycubic Vibrant Orange Transmission Distance: 3.7
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.1
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to BambuLab Green
At layer #8 (0.72mm) swap to Black
At layer #9 (0.8mm) swap to Maroon Red
At layer #12 (1.04mm) swap to Vibrant Orange
At layer #17 (1.44mm) swap to Yellow
At layer #20 (1.68mm) swap to Turquoise for the rest.
Boost Me (for free)
If you like what i have designed please give me a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)