The Mandalorian
Print Profile(1)
Description
hank you for looking at my creations! 💕
If you enjoyed them, don’t hesitate to leave a ❤️ and follow me — it motivates me enormously to continue creating!
World of GLT 3d offers you:
Boost Me (for free)
Happy printing! Don't hesitate to give it a like or/and un Boost it encourages my work ;-)
Project: Mandalorian.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.25x200mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.1
#ff5500 PLA Bambulab Basic Orange Transmission Distance: 4.9
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.1
#a6a9aa PLA BambuLab Basic Silver Transmission Distance: 0.9
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #20 (1.20mm) swap to Orange
At layer #22 (1.80mm) swap to Yellow
At layer #24 (2.00mm) swap to Silver
At layer #25 (2.20mm) swap to Jade White
At layer #26 (3.80mm) swap to Black for the rest.
(Printed on Bambulab H2C)
3D printing : World of Glt 3d
Personal use only. Do not redistribute or sell the files. All rights reserved. © 2026
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)