Bookmark, Pickle Jar, Fest
Print Profile(1)
Description
This 3Mf was done on a Cool Plate. If you are using a different plate, make sure you change to the plate you're using.
Membership
Looking to sell physical prints of this model? You can easily obtain a commercial license right here by joining my membership tier.
You do not need an AMS to change colours. At the layer where you should change colour, change to pause and manually change the colour when the print pauses.
Bookmarks need a clean plate to avoid any corners rising.
Project: Pickle Jar.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.82x152.46mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 1.3mm and the Actual Depth is 1.4mm
Filaments Used:
PLA 3DHOJOR Black Transmission Distance: 0.6
PLA Creality Yellow Transmission Distance: 7
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Yellow
At layer #10 (0.88mm) swap to White for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)