Dr Horrible - Final Form Red Jacket Pose Hueforge

----------------------------

My designs here on MakerWorld are intended for PERSONAL printing use only. I do not, as of right now, have a commercial membership but if you download, print, like and boost I'll be able to activate a commercial membership here and expand my time and effort spent working on these designs and making more for you to sell including exclusives and requests through a Patreon or otherwise! So the more boosts and likes you can help me with, the more I can give back!

Thanks!

IslandLooter

A dramatic, graphic‑novel‑style silhouette featuring the iconic goggles, raised fist, and unmistakable villain‑in‑the‑making energy. This Hueforge piece uses a striking red‑and‑black palette to capture the mood of a cult‑classic antihero with style and attitude.

Perfect for fans of musical mischief, lab‑coat chaos, and anyone who loves bold, poster‑style wall art.

• ⚡ Fast, low‑filament print — ideal for low cost art
• 🎨 High‑contrast palette that pops instantly on any wall
• 🧩 Beginner‑friendly — no supports, clean layers
• 🖨️ Looks premium despite being a simple, efficient print
• Can print without an AMS, just set up pauses

------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #10 (0.88mm) swap to Red
    At layer #15 (1.28mm) swap to Jade White for the rest.

Resize as you like but don't change the Z-Height!

All Hueforge prints can be adjusted for size, but please do not adjust the Z height, it will affect the final look of the print! 

If you find an issue with a print or profile, please message me so I can correct before you publish a review, I'm happy to help sort it out with you!

All images I post with the profile are my own prints, no renders. If you use the same filaments as I publish these with you should have the same results.

If you have an idea you'd like to see made into a Hueforge, send me a message on here and I'll see what I can do!