Harry Potter Chamber of Secrets Bookmark

Become an officially licensed SkyLab 3D seller here: The SkyLab 3D | Patreon

Harry Potter – Chamber of Secrets Bookmark

Step into one of the most unforgettable moments in the wizarding world with this Chamber of Secrets inspired bookmark. Featuring the weathered entrance to the Chamber, Harry stands before the massive serpent-carved doorway as the haunting message above reads:

"The Chamber of Secrets has been opened. Enemies of the Heir... Beware."

The aged inscription, towering stone serpents, and mysterious entrance capture the eerie atmosphere of one of the most iconic scenes in the series.

Whether you're adding it to your own collection or gifting it to a fellow fan, this bookmark is designed to bring a little magic—and mystery—to every book.

If you enjoy this design, be sure to check out the rest of my fantasy-inspired bookmark collection on my profile.

As always, thank you for your downloads, prints, ratings, and support!

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Dark Gray
    At layer #12 (1.04mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Ash Gray
    At layer #17 (1.44mm) swap to Ivory White for the rest.