Bugs Bunny - Looney Toons - 4 colours! - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

P1P

P2S

H2D

H2C

H2D Pro

A2L

H2S

X2D

X1E

X1 Carbon

0.08mm layer, 2 walls, 100% infill

Designer

4.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: 1st Bugs Bunny.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
    #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5.6
    #ff0000 PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #13 (1.20mm) swap to BambuLab Matte Ivory White
    At layer #16 (1.36mm) swap to BambuLab Basic Orange
    At layer #24 (2mm) swap to BambuLab Basic Red
    At layer #25 (2.08mm) swap to BambuLab Matte Ivory White for the rest.