Winnie The Pooh - 4 Colours - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

H2S

X2D

H2C

H2D

P2S

H2D Pro

P1P

P1S

X1E

A2L

0.08mm layer, 1 walls, 100% infill

Designer

4.6 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: v1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.32mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.5
    #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #13 (1.12mm) swap to BambuLab Basic Red
    At layer #18 (1.52mm) swap to BambuLab Basic Sunflower Yellow
    At layer #24 (2mm) swap to BambuLab Matte Ivory White for the rest.

winnie the pooh and friends

winnie the pooh

winnie the pooh hueforge