Print Profile(1)
Description
This is a 3D-printable, fully functional octagonal desk clock featuring a bold, rugged design. It is easy to assemble and makes a great addition to any desk or workshop.
Hardware Required:
To complete this project, you will need:
- 1x Quartz clock movement: Standard size 56 x 56 x 16 mm with a 12 mm shaft (spindle) length.
Assembly instructions:
Step 1: Insert the clock face (dial) into the main body, making sure it is in the correct orientation. First, press the pieces in gently to ensure everything is aligned, and only push them all the way in once you are sure of the fit
Step 2: Insert the nuts into their slots in the correct orientation (with the pointed/tapered side facing inward)
Step 3: Insert the Quartz clock movement
Step 4: Place the back cover onto the rear of the main body and secure it using two screws
Step 5: Attach the front frame (bezel)
Step 6: Install the hands—always put the hour hand on first, followed by the minute hand
Step 7: Slide in the final piece to complete the assembly
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)