Homelander vs. Omni-Man - Mortal Kombat 1 themed

Project: Second Draft.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ff0000 PLA BambuLab Basic Red  Transmission Distance: 4
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 1.9
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 2
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.5
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3.2
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #8 (0.72mm) swap to BambuLab Basic Red
    At layer #9 (0.8mm) swap to BambuLab Basic Blue
    At layer #11 (0.96mm) swap to BambuLab Basic Gray
    At layer #12 (1.04mm) swap to BambuLab Matte Ivory White
    At layer #15 (1.28mm) swap to BambuLab Basic Red
    At layer #19 (1.6mm) swap to BambuLab Basic Sunflower Yellow
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White
    At layer #24 (2mm) swap to BambuLab Matte Mandarin Orange
    At layer #25 (2.08mm) swap to BambuLab Matte Ivory White for the rest.