Hisoka Marow - Hunter X Hunter (2011)

Project: Hisoka V4.5.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.56mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #482960 PLA #BambuLab Basic Indigo Purple  Transmission Distance: 2
    #ec008c PLA #BambuLab Basic Magenta  Transmission Distance: 4.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #f4ee2a PLA #BambuLab Basic Yellow  Transmission Distance: 6
    #c2e189 PLA #BambuLab Matte Apple Green  Transmission Distance: 1.2
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3.2
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #9 (0.8mm) swap to #BambuLab Basic Indigo Purple
    At layer #12 (1.04mm) swap to #BambuLab Basic Magenta
    At layer #17 (1.44mm) swap to BambuLab Basic Red
    At layer #20 (1.68mm) swap to #BambuLab Basic Yellow
    At layer #23 (1.92mm) swap to #BambuLab Matte Apple Green
    At layer #25 (2.08mm) swap to BambuLab Matte Mandarin Orange
    At layer #26 (2.16mm) swap to BambuLab Matte Ivory White for the rest.