Kibble dispenser

Kibble Dispenser for Ø60 mm Jar

Turn a simple jar into a practical gravity-fed kibble dispenser.

This 3D printable dispenser is designed to hold an inverted jar and let dry kibble flow directly into the integrated bowl. The transparent jar makes it easy to see the remaining kibble level at a glance, so you know when it needs refilling.

The model is compact, clean, and print-friendly. It is compatible with the Bambu Lab A1 mini and prints without supports.

Features

• Gravity-fed kibble dispenser
• Uses a jar with a Ø60 mm lid/thread
• Easy to check the remaining kibble level
• Integrated bowl
• Compact footprint
• A1 mini compatible
• No supports required
• Simple print, simple assembly
• Designed manually and optimized for real 3D printing
• No generative AI used in the model design

Compatibility

This model is designed for jars with a Ø60 mm lid/thread.

Before printing, check your jar diameter to make sure it matches the model. Small variations between jars may affect the fit.

Printing

• Supports: No
• Recommended material: PLA or PETG
• Difficulty: Easy
• No assembly

Print the model flat on the build plate. The design is made to avoid supports and keep the print simple.

Use

Fill a compatible jar with dry kibble, screw or place it into the holder depending on your jar type, then flip it into position. The kibble will flow into the bowl by gravity.

Flow may vary depending on the size, shape, and texture of the kibble. Very large or irregular kibble may not dispense as smoothly.

Important notes

Use only with dry kibble.

For pet-related prints, clean the part regularly. FDM prints have layer lines, so PETG may be preferable if you want better resistance to washing. Do not use damaged glass jars.