A bedside shelf

Recessed Bedside Shelf with E-Reader Pocket & Cable Pass-Through

This is a compact, highly functional bedside shelf designed to keep your nighttime essentials organized. It features a recessed main tray to hold your phone or glasses securely, paired with a dedicated vertical slot perfectly sized for an E-Book reader (Kindle, Kobo, etc.).

To keep your bedside clutter-free, the pocket is equipped with both bottom and side cut-outs, allowing charging cables to route through cleanly from any angle.

🚀 Key Features

• A1 Mini Optimized: Designed explicitly to maximize and fit completely within the 180x180x180 build volume of the Bambu Lab A1 Mini.
• Fully Customizable: Includes the original OpenSCAD (.scad) file so you can easily modify the bed rail thickness, tray depth, or wall sizes to perfectly match your furniture.
• Sleek Side Brackets: Features clean structural corbels flush with the outer borders for a minimalist look and excellent print stability.

🛠️ Printing Instructions & Settings

⚠️ CRITICAL STEP (Do Not Skip!):

You must use an Outer Brim (an 8mm brim is highly recommended). Because the contact area on the build plate is relatively narrow compared to the overall height, an outer brim is absolutely necessary to prevent warping. Without it, the cooling material will pull up and deform the outer edges of the tray during printing.

• Orientation: Print it lying on its side (as pre-configured in the file) to ensure maximum strength for the clamping bracket.
• Material: PLA or PETG.
• Infill: 15% – 20% (Gyroid recommended for structural strength).
• Brim: Outer Brim Only ($\ge 8\text{ mm}$).