Erebor Map
Print Profile(1)
Description
I designed this map to fit into the lid of a Hobbit-themed Magic The Gathering deck box, but of course, it can also be incorporated into your geek decor ;)
Here is the HueForge description:
Project: Erebor map 2.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.16mm
The Model is 178.2x120mm in size
You may print at higher layer heights below the Base Thickness of 0.52mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.2mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.76mm) swap to Red
At layer #7 (0.88mm) swap to Black
At layer #12 (1.48mm) swap to Desert Tan
At layer #16 (1.96mm) swap to Ivory White for the rest.
The 3MF file is already configured for the changes. Remember to re-map your filaments to match the said changes
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)