Thomas "Tom" Shelby

Project: Tom With a Pistol.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1
    #042f56 PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #0086d6 PLA #BambuLab Basic Cyan  Transmission Distance: 8
    #9d432c PLA BambuLab Basic Brown  Transmission Distance: 1.1
    #ae835b PLA #BambuLab Matte Caramel  Transmission Distance: 1.5
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #5d6578 PLA #BambuLab Basic Blue Gray  Transmission Distance: 3
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #10 (0.88mm) swap to BambuLab Matte Dark Blue
    At layer #11 (0.96mm) swap to #BambuLab Basic Cyan
    At layer #12 (1.04mm) swap to BambuLab Basic Brown
    At layer #15 (1.28mm) swap to #BambuLab Matte Caramel
    At layer #18 (1.52mm) swap to BambuLab Matte Mandarin Orange
    At layer #20 (1.68mm) swap to #BambuLab Basic Blue Gray
    At layer #23 (1.92mm) swap to BambuLab Matte Ivory White
    At layer #24 (2mm) swap to BambuLab Matte Mandarin Orange
    At layer #26 (2.16mm) swap to BambuLab Matte Ivory White for the rest.