Ryu (incl: 4 Colour and 7 Colour) - Street Fighter

Figured I was due to make a Ryu from Street Fighter (even though I'm a straight up MK 2-3 for SNES or bust kinda guy ;)  but hey to each there own), so here you guys go :) 

7  Colour: 
Project: Ryu 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #080a0d PLA BambuLab Basic Black  Transmission Distance: 0.3
    #9d2235 PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ae835b PLA #BambuLab Matte Caramel  Transmission Distance: 1.5
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #8 (0.72mm) swap to BambuLab Basic Maroon Red
    At layer #9 (0.8mm) swap to BambuLab Basic Dark Gray
    At layer #11 (0.96mm) swap to BambuLab Basic Red
    At layer #15 (1.28mm) swap to #BambuLab Matte Caramel
    At layer #17 (1.44mm) swap to BambuLab Matte Ivory White
    At layer #19 (1.6mm) swap to BambuLab Matte Mandarin Orange
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White for the rest.

4 Colour: 
Project: Red Ryu.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
This print uses 4 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #8 (0.72mm) swap to BambuLab Basic Red
    At layer #16 (1.36mm) swap to BambuLab Matte Ivory White
    At layer #17 (1.44mm) swap to BambuLab Matte Mandarin Orange
    At layer #22 (1.84mm) swap to BambuLab Matte Ivory White for the rest.