Samurai Woman by a Harvest Moon Hueforge

Project: Samurai Woman by Harvest Moon_V3_5Colors.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 121.95x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm

The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

Filaments Used: (* = Owned)
#000000 PLA Sunlu Meta Black Transmission Distance: 1
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#f67405 PLA PolyLite Orange Transmission Distance: 7.5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA Sunlu Meta White Transmission Distance: 8

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to Maroon Red
At layer #26 (2.16mm) swap to Orange
At layer #33 (2.72mm) swap to Yellow
At layer #38 (3.12mm) swap to White for the rest.

For only one AMS, start with 4 colors as follows:

Slot 1: Black
Slot 2: Maroon Red
Slot 3: Orange
Slot 4: Yellow

Pause has been added and swap filaments as follows:

Slot 1: Black → White