Winry and Edward (EdWin) - Full Metal Alchemist

Project: v2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #1c254c PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2
    #5b6579 PLA Bambulab Basic Blue Gray  Transmission Distance: 1.9
    #68724d PLA BambuLab Matte Dark Green  Transmission Distance: 1
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.5
    #e7ceb5 PLA Bambulab Basic Beige  Transmission Distance: 3.2
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #6 (0.56mm) swap to BambuLab Matte Dark Blue
    At layer #8 (0.72mm) swap to Bambulab Basic Blue Gray
    At layer #10 (0.88mm) swap to BambuLab Matte Dark Green
    At layer #11 (0.96mm) swap to BambuLab Basic Red
    At layer #13 (1.12mm) swap to BambuLab Basic Sunflower Yellow
    At layer #17 (1.44mm) swap to Bambulab Basic Beige
    At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest.