Link - Was It All Worth It? - 100 Uploads! - WWHO

Well gang here we are, my 100th print for MakerWorld. I figured since my first upload was of Ganon that it would be fitting to have Link for my 100th. 

This is going to be a part of a series I call "We Were Heroes Once" or WWHO for short. It'll be a 9 piece set that looks at what happens to our childhood heroes when they grow old. 

This first piece called "Was it All Worth It?" features a much older, hardened Link after years of battle looking back at the reflection of a once younger more optimistic Link. 

Hope you all enjoy
- LJ

 Project: First Draft.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3

    #042f56 PLA BambuLab Matte Dark Blue  Transmission Distance: 0.2

    #595b30 PLA Bambulab Dark Green  Transmission Distance: 0.1

    #ae835b PLA BambuLab Matte Caramel  Transmission Distance: 1.5

    #0078bf PLA #BambuLab Matte Marine Blue  Transmission Distance: 2

    #507526 PLA BambuLab Basic Mistletoe Green  Transmission Distance: 0.1

    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3

    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4

This print uses 8 unique filaments

Swap Instructions:

    Start with PolyLite Black

    At layer #7 (0.8mm) swap to BambuLab Matte Dark Blue

    At layer #9 (0.96mm) swap to Bambulab Dark Green

    At layer #10 (1.04mm) swap to BambuLab Matte Caramel

    At layer #11 (1.12mm) swap to #BambuLab Matte Marine Blue

    At layer #14 (1.36mm) swap to BambuLab Matte Caramel

    At layer #15 (1.44mm) swap to BambuLab Basic Mistletoe Green

    At layer #17 (1.6mm) swap to BambuLab Matte Mandarin Orange

    At layer #20 (1.84mm) swap to BambuLab Matte Ivory White for the rest.