Chats Hueforge
Print Profile(1)
Description
Lithograph made from a photo of our cats. After converting it into a drawing using AI, I used Hueforge to create this lithograph
I chose a good base thickness to ensure the card is stiff enough
To achieve a similar result, use the color filaments listed above
I also recommend this stand model to display it: https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc#profileId-167215
If you want to reduce the size, do not change the thickness (Z-axis) otherwise the model will not work
errors on floating regions are normal and can be ignored
for color changes you can do it manually by pausing and changing colors as follows:
- Start with black
- Layer 14 switch to red
- Layer 19 switch to yellow
- Layer 23 switch to white
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)