Cyborg Samurai Woman Hueforge Happy Accident

This one was made as a Happy Accident and might be my favorite of the trio I made, let me know which one you like best.

Project: Cyborg Samurai Woman_AlT version Happy Accident

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 108.22x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm

The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

Filaments Used: (* = Owned)
#000000 PLA Sunlu Meta Black Transmission Distance: 1
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA Sunlu Meta White Transmission Distance: 8
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #20 (1.68mm) swap to Blue
At layer #22 (1.84mm) swap to Cyan
At layer #25 (2.08mm) swap to Turquoise
At layer #28 (2.32mm) swap to Sunflower Yellow
At layer #32 (2.64mm) swap to White
At layer #41 (3.36mm) swap to Red for the rest.

For only one AMS, start with 4 colors as follows:

Slot 1: Black
Slot 2: Blue
Slot 3: Cyan
Slot 4: Turquoise

Pause has been added and swap filaments as follows:

Slot 2: Blue → Sunflower Yellow
Slot 1: Black → White