squirrel frame hueforge
Print Profile(1)
Description
Project: écureuil.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm
#1c1c1c PLA PolyTerra Charcoal Black Transmission Distance: 0.3
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Change instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Cocoa Brown
At layer #14 (1.2mm) swap to Beige
Border colors only from here to the end.
At layer #31 (2.56mm) swap to Ivory White
This slider is set higher than the mesh depth. This does not affect your final mesh. Consider removing it.
At layer #38 (3.12mm) swap to Cocoa Brown for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)