Dress Up Darling - Marin Kitagawa Backlit Lineart

This is a backlit model intended to be displayed in front of a light source.  Using a white first layer it allows the image to positively glow when placed in front of a light - the images truly dont do effect justice!  The colors listed are what I used, but are certainly swappable to other colors or shades. 

The physical version uses the filament colors listed below. It is designed as a flat display piece that can be placed on a desk stand or mounted/framed after printing.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

You may print at higher layer heights below the Base Thickness of 1mm
The Max allowed Thickness is 3mm and the Actual Thickness is 2.28mm

    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 0.5
    #d93b90 PLA Panchroma Translucent Magenta  Transmission Distance: 5.5
    #08abfb PLA Panchroma Translucent Cyan  Transmission Distance: 8
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
This print uses 4 unique filaments

Swap Instructions:
    You do not set Layer Swaps in the slicer. Instead each color is a separate STL file.
    The file is named with the piece (Base or Nest) and filament color.
    Load all STLs for one piece at once — your slicer will ask if it is a Multi-part model. Select yes.
    Assign filaments by color name in the slicer's Object view.
    Print everything together. No assembly required after printing.

3MF (BambuStudio)
Color Drop Printing Instructions:
    This model has been split into 2 nested pieces.
    Each piece is split by color for color-by-object printing.
    Original height: 2.08 mm
    Tallest piece: 1.60 mm
    Height saved: 0.48 mm
    Nest at BambuLab_Basic_Jade_White (layer 2 → layer 0)