My Hero Academia - Stain MHA Hueforge
Print Profile(1)
Description
The next entry into my MHA Series is none other than the Hero Killer….. STAIN!!! ☠️☠️☠️
I'm very happy to bring you another 4 color hueforge that you can set, forget, and wake up to. 💕
I hope you enjoy it as I am currently working to bring even more of the villains to my series soon. When there isn't much to say, I try not to say much, so let's get straight into it!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 235x132.26mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Yellow Transmission Distance:6
PLA BambuLab Basic Red Transmission Distance:4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Yellow
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Jade White
At layer #14 (1.2mm) swap to Red
At layer #21 (1.76mm) swap to Yellow
At layer #23 (1.92mm) swap to Jade White
At layer #26 (2.16mm) swap to Black
At layer #27 (2.24mm) swap to Jade White for the rest.
Boost Me (for free)
Thanks for all the kind support everybody! Your ratings and comments mean a lot, and the boosts are very appreciated! 🙏💕
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)