Onna-Musha, Female Warrior Bookmark

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Heroes and warriors are not limited to men. Let's celebrate the Onna-Musha, a female warrior. 🌸⚔️

This bookmark beautifully captures feminine elegance with the stoicism of a warrior. Let this silent guardian rest between chapters, keeping watch over the wisdom of the text. 📖

Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black  Transmission Distance: 0.6
BambuLab Basic Beige  Transmission Distance: 8
BambuLab Basic Hot Pink  Transmission Distance: 3.9
This print uses 3 unique filaments

Swap Instructions: Not applicable. This is a style for which colors are already assigned in the STLs. Since this print has at times multiple colors on a layer, an AMS is required.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print.

Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections