Iron Man
Print Profile(1)
Description
Please rate if you print, this really helps me, thank you
You can resize the model, but only change the X- and Y-axis NEVER change the Z-axis
FOR A1 MINI USERS, YOU CAN OPEN THE FILE AND REORIENTATE THE HUEFORGE ON THE BUILDPLATE
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 90x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0
PLA Kingroon Red Transmission Distance: 4.1
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA BambuLab Basic Yellow Transmission Distance: 5.9
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to Sky Blue
At layer #19 (1.6mm) swap to Yellow
At layer #24 (2mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)