Sunrise With Espeon - Eeveelutions 8 of 9 - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

H2S

P2S

H2C

X1 Carbon

P1P

X1E

H2D

X2D

A2L

H2D Pro

0.08mm layer, 2 walls, 100% infill

Designer

5.4 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: Sun Rise With Espeon v2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #5e43b7 PLA BambuLab Basic Purple Transmission Distance: 5
    #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
    #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5.6
    #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.8
    #f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
    #f4ee2a PLA #BambuLab Basic Yellow Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.6
This print uses 8 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #7 (0.64mm) swap to BambuLab Basic Purple
    At layer #12 (1.04mm) swap to BambuLab Basic Maroon Red
    At layer #14 (1.2mm) swap to BambuLab Basic Orange
    At layer #16 (1.36mm) swap to BambuLab Basic Sunflower Yellow
    At layer #20 (1.68mm) swap to BambuLab Matte Mandarin Orange
    At layer #22 (1.84mm) swap to #BambuLab Basic Yellow
    At layer #24 (2mm) swap to BambuLab Basic Jade White for the rest.