Sylveon - Eeveelutions Set 6 of 9

Project: Fixed Tail and colour scaling.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #5e43b7 PLA BambuLab Basic Purple  Transmission Distance: 5
    #950051 PLA BambuLab Matte Plum  Transmission Distance: 1.6
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 0.8
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.5
    #e8afcf PLA #BambuLab Matte Sakura Pink  Transmission Distance: 2.4
    #56b7e6 PLA BambuLab Matte Sky Blue  Transmission Distance: 1.3
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 8 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #10 (0.88mm) swap to BambuLab Basic Purple
    At layer #12 (1.04mm) swap to BambuLab Matte Plum
    At layer #13 (1.12mm) swap to BambuLab Basic Cobalt Blue
    At layer #15 (1.28mm) swap to BambuLab Basic Hot Pink
    At layer #18 (1.52mm) swap to #BambuLab Matte Sakura Pink
    At layer #20 (1.68mm) swap to BambuLab Matte Sky Blue
    At layer #23 (1.92mm) swap to BambuLab Matte Ivory White for the rest.