Print Profile(1)
Description
This has been the start of a fun project for me. I am looking to print all 151 original. I wanted them for my wall and wanted to share. Hope you like them.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Caramel Transmission Distance: 1.5
PLA BambuLab Matte Desert Tan Transmission Distance: 1
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Red
At layer #13 (1.12mm) swap to Dark Brown
At layer #15 (1.28mm) swap to Caramel
At layer #17 (1.44mm) swap to Desert Tan
At layer #21 (1.76mm) swap to Ivory White for the rest.
Boost Me (for free)
A boost a follow a like a comment they all help. Thank you
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)