jr2142

cover

plate_1.png

plate_2.png

IMG_2959.webp

plate_1.webp

plate_2.webp

The lid needs supports and the profile has been configured to use normal supports. Be careful, the grass has small block pieces at the bottom that easily break apart while removing supports. This is doable though, if you pay attention to those single grass pixels. &nbsp;Best strategy is to remove support under the pixels first and only afterwards you remove the support between pixels.&nbsp;You can use the copies function of Bambu Handy to print up to 7 lids or boxes at once, so no separate print profile needed.

Single Box, Lid with regular Supports

featured_preview_60254ffb-66c5-4c4d-9de0-2252a4856bd2.webp

IMG_2954.webp

IMG_2957.webp

IMG_2958.webp

The lid needs supports and the profile has been configured to use <a target="_blank" href="https://eu.store.bambulab.com/products/support-for-pla" rel="nofollow noopener">Bambu Support for PLA</a> (aka Support W) for the interface layers. The grass has small block pieces at the bottom that easily break apart when removing supports. Still, some light post-processing with needle nose pliers and a a file tool is required. &nbsp;If you are comfortable removing supports around intricate details or do not have an AMS: Use the profile with regular supports. The effort is the same, just added risk to break apart a pixel.

Single Box, Lid with Support for PLA

IMG_2955.webp

timelapse_2023-09-29_16-26_dc846b65-c579-4efd-aa1d-2c859bc05b5c.webp

The lid needs supports and the profile has been configured to use <a target="_blank" href="https://eu.store.bambulab.com/products/support-for-pla" rel="nofollow noopener">Bambu Support for PLA</a> (aka Support W) for the interface layers. The grass has small block pieces at the bottom that easily break apart when removing supports. &nbsp;If you are comfortable removing supports around intricate details or do not have an AMS: Use the profile with regular supports.

8 Boxes, Lid with Support for PLA

Bricks and Blocks

Image 2025-06-15 at 22.38.09.jpeg

Image 2025-06-15 at 22.38.09 (2).jpeg

Image 2025-06-15 at 22.38.09 (1).jpeg

After printing this a few times, I found the standard (non-tree) supports ended up being faster and using less material so here you go!

Standard (non-tree) support, 0.2mm layer, 10% infill

Plazman

2023-12-08_f259f41347a708.jpeg.webp

I took a swing at painting it in Bambu Studio and printed it in 4 colors (Bambu PLA - Dark Brown, Latte Brown, Bambu Green, Dark Green). The Dark Green and Dark Brown pretty much look the same, could have saved a filament swap there and sped up print time.

4-color version

Minecraft Grass Block Container

Reshare of the awesome <a target="_blank" href="https://www.thingiverse.com/thing:5683322" rel="nofollow noopener">Minecraft Grass Block Container</a> from <a target="_blank" href="https://www.thingiverse.com/bcaron/designs" rel="nofollow noopener">BCaron</a>. Check out the <a target="_blank" href="https://www.thingiverse.com/thing:5683322" rel="nofollow noopener">link</a> for details.&nbsp;&nbsp;

Frembo

imagegrass4.jpg

imagegrass3.jpg

imagegrass2.jpg

imagegrass.jpg

Minecraft Grass Block Keycap

IMG_8844.jpg

Screenshot 2026-05-23 020226.png

Minecraft Toothbrush Holder

ASIA

Print Profile(5)

Description

Comment & Rating (404)

The user shared this model, but is not the original creator of it.

License

Remixes (5)

Related Models